Electrodes For Stainless Steel And Heat Resisting Steels

Approx. Rs 550 / KilogramGet Latest Price

Product Details:

A medium heavy coated , basic type electrode giving 25/12 deposit which has excellent corrosion and oxidation resistance in continuous service up to 1100°C. Gives a quiet and stable arc, low spatter, smooth weld bead and easily detachable slag. Welds are radiographically sound.
TYPICAL APPLICATIONS: Welding AISI 309 type, straight chrome steels, joining stainless steel to lower alloy steels and carbon steels, welding in the clad side of 18/8 clad steels. Building up steel to improve wear resistance and for building up worn out parts of wear resisting steels.
SPECIAL INSTRUCTIONS FOR WELDING:
• Keep electrodes dry.
• Do not exceed recommended current limit.
• Hold short arc
• Ensure good fit up on joints.
• Adopt proper sequence.
• Remove the slag with stainless steel wire brush.
• Redry electrodes at 300°C for 1hour for better results

Approx. Rs 385 / KgGet Latest Price

Product Details:

E316L-16 Stainless Steel electrodes deposit type 316 with a maximum of 0.04% carbon in the weld deposit. The electrode is used for welding type 316L or type 316 stainless steels. E316L-16 is widely used of chemical holding equipment.

Approx. Rs 185 / KilogramGet Latest Price

Product Details:

SS 308L Welding Electrodes

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 320 / KgGet Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 200 / KgGet Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 320 / KgGet Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 320 / KgGet Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 365 / KgGet Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 360 / KgGet Latest Price

Product Details:

Product Description
AWS  E-309MO-16 is a lime-titanium type electrode for welding general stainless steels  with all positions welding. Widely be used for welding of0Cr  18Ni9(e.g.301.302.304.308) and Cr18Ni9Ti stainless steel structures, which  working temperature is below 300℃  to 350℃ for 1 hour.
Applications

Suitable for welding steel containing 22 - 26% Cr, 11 - 14 % Ni, 2 - 3% Mo, also for joints between 18 Cr, - 8 Ni,
stainless steel and mild steel, or low alloy steel as well as clad steel.

Approx. Rs 690 / KgGet Latest Price

Product Details:

Weldcote Metals E310-16 electrodes are used to weld stainless steels of similar composition in wrought and cast form. The weld deposit is fully austenitic, and as such calls for minimum heat input during welding.
APPROVALS: Manufactured under Quality System approved by ASME, IS09001. Meets AWS 5.4 Class E310-16.

Approx. Rs 330 / KilogramGet Latest Price

Product Details:

Application
E310H-16 electrodes are used to weld high alloy heat and corrosion resistant castings. This electrode is not recommended for service in high sulfur atmospheres.

Approx. Rs 480 / KgGet Latest Price

Product Details:

• Rutile basic all position stainless steel electrodes for welding Ti or Nb stabilized 316 or equivalent steels
• High resistance to general and intergranular corrosion
• Smooth bead appearance
• Easy slag release
• Strong electrode coating
• Weldable on AC and DC

 

 

 

Typical Applications

• Ti or Nb stabilized 316 or equivalent steels

Welding Positions

All, except vertical down

Approx. Rs 350 / KgGet Latest Price

Product Details:

E-330H-16 SV-330 Electrodes

CR0MALL0Y-2D-L is an electrode giving Cb-stabilised extra low -carbon 18 Cr -12 Ni-2.3 Mo weld metal having exceptional resistance to halide attack and inter granular corrosion. The electrode operates with a quiet stable arc, and beads are smooth,finelly rippled and uniform.The ferrite content of the weld metal is controlled to give adequate crack resistance. The electrode is used for welding AISI 316,316-L,316Ti and 318 Steels and their equivalent grades.

Approx. Rs 240 / KilogramGet Latest Price

Product Details:

E308/308L-15 is a kind of Cr19Ni10 stainless steel electrode with basic coating. The weld metal has excellent mechanical properties and intercrystalline corrosion-resistance. DCRP (Direct Current Reversed Polarity). All-position welding.
Uses: Used for welding corrosion-resistant 0Cr19Ni9 stainless steel structures below 300℃, and also used for weld some steel with worse weldability ( such as high-chrome steel, etc.) and surfacing welding on the surface layers of stainless steel.

Approx. Rs 245 / KilogramGet Latest Price

Product Details:

Stainless Steel Welding Electrodes Brand Name Eknoweld Grade SS 308L


Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 280 / KgGet Latest Price

Product Details:

CR0MALL0Y-2D-L is an electrode giving Cb-stabilised extra low -carbon 18 Cr -12 Ni-2.3 Mo weld metal having exceptional resistance to halide attack and intergranular corrosion. The electrode operates with a quiet stable arc, and beads are smooth,finelly rippled and uniform.The ferrite content of the weld metal is controlled to give adequate crack resistance. The electrode is used for welding AISI 316,316-L,316Ti and 318 Steels and their equivalent grades.

Approx. Rs 450 / KilogramGet Latest Price

Product Details:

• A rutile-basic all position fully austenitic NiCrMoCu electrode
• Especially for phosphoric and sulphuric acid plants
• Designed for Mo and Cu alloyed high NiCr-alloyed grades
• Very smooth bead appearance and easy slag release
• Also approved for welding dissimilar metals for service up to 450°C
• High resistance to pitting (PREN ~40)

 

 

 

Typical Applications

• Phosphoric and sulphuric acid plants
• Mo and Cu alloyed high NiCr-alloyed grades

Welding Positions

All, except vertical down

Approx. Rs 500 / KgGet Latest Price

Product Details:

Tech-Rod® 385 is used for welding materials of similar chemical composition (Type 904L). These materials are used in fabrication of equipment and vessels for handling and storage of sulfuric acid and phosphoric acid. The weld metal is fully austenitic, and must be done with low heat input, using a stringer bead technique

Approx. Rs 320 / KgGet Latest Price

Product Details:

E-316/316L-15 is a kind of low-carbon Cr18Ni12Mo2 stainless steel electrode with basic coating. Due to Mo added to the weld metal, it has excellent corrosion-resistance, heat-resistance and crack-resistance, especially suitable for chloride ion pitting corrosion-resistance. DCRP (Direct Current Reversed Polarity). All-position welding.
Uses: Used for welding low-carbon 0Cr18Ni12Mo2 stainless steel equipment, and also used for welding high-chrome steel (such as Cr13 and Cr17), which can not be given heat treatment after welding, and welding dissimilar steel.

Approx. Rs 850 / KgGet Latest Price

Product Details:

E-309Mo-15 is a basic coated all position stainless steel electrode giving an austenitic weld deposit of 23Cr, 13Ni, 2.5Mo, type. The addition of Mo to the normal AISI 309-type Steel improves its tensile strength and corrosion resistance.

Approx. Rs 425 / KilogramGet Latest Price

Product Details:

E-347/347L-15 is a kind of Cr19Ni10Nb stainless steel electrode containing Nb stabilizer with basic coating. It has excellent intercrystalline corrosion-resistance. DCRP (Direct Current Reversed Polarity). All-position welding.
Uses: Used for welding key corrosion-resistant 0Cr19Ni11Ti stainless steel containing Ti stabilizer.

Approx. Rs 330 / KgGet Latest Price

Product Details:

Rutile type stainless steel electrode for welding stabilized austenitic stainless Cr-Ni-Mo steels and cast steels. For operating temperatures up to +400°C. Suitable for welding of stainless steel tanks, valves and pipes in chemical, textile, paint and paper industries. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine-droplet metal transfer, good wash-in of joint sides, easily removable slag.

Product Price :Get Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Product Price :Get Latest Price

Product Details:

Reliability, flexibility, corrosion resistance finish, durability and ability to withstand high temperature are some of the features, due to which our products are highly applauded in the market.

Approx. Rs 250 / KgGet Latest Price

Product Details:

Rutile type stainless steel electrode for welding stabilized austenitic stainless Cr-Ni-Mo steels and cast steels. For operating temperatures up to +400°C. Suitable for welding of stainless steel tanks, valves and pipes in chemical, textile, paint and paper industries. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine-droplet metal transfer, good wash-in of joint sides, easily removable slag.

Approx. Rs 280 / KilogramGet Latest Price

Product Details:

E312-16 electrodes were originally designed for the welding of high tensile alloys to high temperature heat-resisting alloys on turbo-jet engines. However, based upon performance, these electrodes have found wide acceptance for the welding of newly developed high yield steels and abrasion resisting steels and dissimilar steels. The weld deposit of E312-16 electrodes, “as welded,” has the highest tensile and yield strength of any stainless arc welding electrode commonly used today.

Approx. Rs 330 / KilogramGet Latest Price

Product Details:

E316-16 electrodes are designed for the welding to type 316 chromium-nickel steel. This alloy contains 2% to 3% molybdenum is addition to sufficient chromium and nickel to render is austenitic. Molybdenum is added to increase the corrosion resistance of the alloy to a firm attack know as pitting, which is induced by such corrosive metals as sulfuric and sulfurous acids, sulfites, chloride and cellulose solutions.

Approx. Rs 220 / KilogramGet Latest Price

Product Details:

CROMALLOY-A (St) is a cb-stabilised 19Cr-10Ni electrode having pleasing performance in both AC and DC(+).The deposit resists sensitisation when heated in the 425t,C-850cC range. It can be used for welding AISI 347,321 and 304 steels and also for cladding carbon and alloy steels with suitable buffer layer.

Product Price :Get Latest Price

Product Details:

E317L-16 electrodes are designed for welding 317 and 317L in all positions. The higher molybdenum content reduces the susceptibility to pitting.

Product Price :Get Latest Price

Product Details:

E320-16 electrodes are used to weld matching composition Columbium and Manganese base material. This alloy is resistant to corrosion, especially of sulfuric acids.

Product Price :Get Latest Price

Product Details:

E317-16 used for welding of dissimilar steels to carbon steel, or stainless steel to carbon steel. Stringer bead technique should be used for flat, horizontal and overhead welding, weaving technique for vertical position.